Kip 7170
Posted: Thu Feb 20, 2020 3:22 pm
New machine, 1 month in field. Blank output. Replaced HV Pwb. Problem returned.
PageWideForum.com
Discussions on the HP PageWideXL Series of Wide Format Ink Jet Printers
https://www.pagewideforum.com/
Kip 7170
Page 1 of 1
Re: Kip 7170
Posted: Thu Feb 20, 2020 4:36 pm
Is it putting an image to the drum? Have you checked all your voltages? Does the LED pin array have the right voltage? Developer mod have the right voltages and turning right? Not shorting out the corona? All grounds clips touching? Do a jam and see if there is a image on the drum.
Re: Kip 7170
Posted: Thu Feb 20, 2020 4:57 pm
This is out of the manual.
- KIP Blank Image.jpg (126.43 KiB) Viewed 5856 times