Error code 0040-0002-0X69

General info
Post Reply
jedi4342
Posts: 66
Joined: Wed Mar 08, 2017 10:14 am
Contact:

Error code 0040-0002-0X69

Post by jedi4342 »

In the middle of printing the printer will print out a blink sheet and throw this code. 0040-0002-0X69. Where the X is at will change from 6 to 8 to3 to 2 and so forth. Has any body else have a pagewide that has done this and could help? I know it can not be every printhead pca board is bad
User avatar
Mark in Vegas
Posts: 59
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Error code 0040-0002-0X69

Post by Mark in Vegas »

OK, I'm just taking a WAG here...

If you haven't already done these it couldn't hurt

Bring the print bar to the top

Reseat all the print head connections. If you're really feeling ambitious pop the covers off the print heads and reseat the pca connectors under there
Reseat the data distribution pca connectors
Reseat the print bar hub pca connectors

When you see that many errors changing around it's probably just a flakely connection. This doesn't rule out a pca going bad but it's a place to start
jedi4342
Posts: 66
Joined: Wed Mar 08, 2017 10:14 am
Contact:

Re: Error code 0040-0002-0X69

Post by jedi4342 »

Have done all except the distribution board. That was my next to try. After that will be the data cable. Sorry, didn't get into what I had already been though. I see I'm on the right track though.
User avatar
Mark in Vegas
Posts: 59
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Error code 0040-0002-0X69

Post by Mark in Vegas »

I've had the data connector become unseated on one of our 8000's, maybe you're there. I can tell you that the cable from data distribution to the ebox is a major PIA
jedi4342
Posts: 66
Joined: Wed Mar 08, 2017 10:14 am
Contact:

Re: Error code 0040-0002-0X69

Post by jedi4342 »

There are a few things on this printer that are a PIA. Why should this be any different. Still better printer then KIP
User avatar
Mark in Vegas
Posts: 59
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Error code 0040-0002-0X69

Post by Mark in Vegas »

WORD!
jedi4342
Posts: 66
Joined: Wed Mar 08, 2017 10:14 am
Contact:

Re: Error code 0040-0002-0X69

Post by jedi4342 »

Should have posted this a little while back. Found out what it was. CZ309-67072
PEM cable loop. Replaced it and have not seen the code since.
User avatar
Mark in Vegas
Posts: 59
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Error code 0040-0002-0X69

Post by Mark in Vegas »

Earned your paycheck that day
jedi4342
Posts: 66
Joined: Wed Mar 08, 2017 10:14 am
Contact:

Re: Error code 0040-0002-0X69

Post by jedi4342 »

It was interesting to say the least. Tried a lot of other parts 1st. Everything would work good for about 2 to 3 days and then go back to doing it again. This has gone for a few weeks now with no 0040 error code.
valentindu16
Posts: 2
Joined: Mon May 03, 2021 1:22 am
Contact:

Re: Error code 0040-0002-0X69

Post by valentindu16 »

Mark in Vegas wrote: Tue Feb 11, 2020 4:04 pm I've had the data connector become unseated on one of our 8000's rachat de credit banque, maybe you're there. I can tell you that the cable from data distribution to the ebox is a major PIA
It happens all the time when you do something wrong.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests